Garage floor concrete in Lancaster CA - a slab that wears well and drains right
Cracked, dusty or pooling garage floor? We pour, joint and cure a new slab on the right timing so it holds up.
What goes into a garage floor slabthe way L&M pours it in Lancaster
Most calls about garage floor concrete in Lancaster start with something you can see. It might be a crack across the middle, a top that dusts under your shoes, high and low spots, or water that sits instead of running out. A garage floor is a slab we form, pour and finish to take every tire and boot you put on it.
A lot of that trouble comes down to timing. Finishing, cutting the joints and curing each have a window, and missing one shows up later as cracks, dust, uneven spots or poor drainage. So on a garage floor we stay with the slab until it's done, because the concrete keeps its own schedule and won't wait for ours.
The price moves with the size of the garage, how much work the ground needs before we pour, and whether you plan to coat the floor later, since that changes what goes under the slab. The schedule turns on the prep and the cure more than the pour itself. Your written estimate spells out what's included and what isn't.
You'll know exactly what you're getting before anything is formed, so call (661) 952-4153 and tell us about your garage.
Garage floor concrete for how you use it
Every garage carries something different, so before we plan the slab we ask what it has to hold, whether you'll coat it and how it meets the walls.
New garage slabs
The base is hidden on day one and the first thing people want to cut, so we dig out and pack the subgrade, the ground under the slab, before anything else.
Floors you'll coat later
Say before the pour if you'll coat it, because floor guides say a vapor barrier protects a coating best when it's laid right against the slab.
Fiber or steel in the slab
Fibers in the mix help the slab resist pulling apart and crack less, but they aren't structural, so a heavy-use floor may call for rebar, steel bars set inside the slab.
Why Lancaster homeowners call L&Mfor floors that come out level
You'll get plain answers about what your floor needs and what it doesn't, because I'd rather pass on a job than pour something I'd have to apologize for.
I measure the garage myself
I come out myself to look at the ground and take the measurements, so the person pricing your floor is the same one who answers for it.
My crew, with me at the pour
The crew doing the work is one I trained, and I'm on site for the pour, because the finishing and the saw cuts can't wait for anybody.
Straight forms since 2013
I learned under a foreman who made me redo forms until they were straight, and I've poured floors, driveways and patios that way since starting this business in 2013.
Licensed and insured for your garage
We're fully licensed and insured, so your job is covered from the first form board we set to the last saw cut we make.
Decorative work and walls too
If you'd like color or pattern on the approach, or the slope beside the garage needs holding back, we also do decorative concrete and concrete retaining walls.
Get a written garage floor estimatefrom L&M in Lancaster
Tell us the garage's size in square feet and whether you plan to coat the floor, and we'll reply within one business day. I'll come out for a free quote on site, with no pressure and no obligation.
From first call to cured slabhow a garage floor job runs
You get one written estimate that lays out the job plainly, then one crew from the prep to the walkthrough, so there's nobody to chase and nothing to guess at.
You call or send the form
Call (661) 952-4153 or send the form and tell us what the garage floor has to carry, from daily parking to a full shop setup.
Site visit and written estimate
Once I've seen the garage, you get the estimate in writing, with the slab, the base work and any coating prep spelled out so you can decide.
We prep the ground and forms
We set the forms straight and square and put isolation joints, a separating strip, where the slab meets walls and columns so it moves on its own.
Pour, finish and cut
We pour and finish, then saw the control joints, the cuts that tell the slab where to crack, right on time, because a late cut lets it crack wherever it likes.
Cure and walkthrough
While the slab cures we keep it from drying out, then we walk the finished floor with you before we call the job done.
Garage floor questions
How much does a new concrete garage floor cost in Lancaster, CA?
A garage floor slab in Los Angeles County usually costs about $8 to $15 per square foot, which is the nearest going rate for Lancaster. That's the market, not our price, and where yours lands depends on the size, how much the ground needs before the pour and any coating prep. Your written estimate gives you the actual number.
Why does a new concrete garage floor have saw cuts in it?
Those saw cuts are control joints, and they give the concrete a planned place to crack as it shrinks, so the crack runs inside the cut instead of across your floor. Slab joint guidance puts the timing usually within 4 to 12 hours after the pour, depending on the temperature and the mix, and getting it right decides where the cracks go. That's why we stay with the slab until the joints are in.
How long does new concrete take to cure in hot weather?
In hot weather, curing should start as soon as finishing ends and last at least 3 days. During that time the slab stays under wet burlap and plastic, gets a liquid curing compound or is kept wet with water, so the concrete doesn't dry out before it's ready.
Does a garage floor job in California need a licensed contractor?
Yes, unless the whole contract, labor and materials together, comes to less than $500. California's concrete license class covers forming, pouring, placing and finishing flat concrete work like a garage floor, and the small-job exemption doesn't cover a small piece of a bigger project. Splitting a job into hourly charges doesn't change that either, because it still counts as one job.
What causes a new garage floor to crack?
Most new floors crack because concrete shrinks as it dries, and the more water in the mix, the more it shrinks. Cracks end up in the wrong place when the joints are cut late or skipped, or when the base underneath wasn't packed. A slab that's poured and jointed on time still cracks, just where it was told to.
What is the best way to pour a garage floor in hot weather?
Hot-weather guidance says to place and finish concrete outside the hottest part of the day when possible, and to finish it without sprinkling water on the top. Wind, dry air and strong sun cause the same problems in any season in a dry climate, not just in summer. It's fair to ask any contractor what time of day they plan to pour.
Garage floor concrete around Lancaster
We're based in Lancaster and pour garage floors in Palmdale, Quartz Hill and the other cities around it. Pick your city below, or call (661) 952-4153 if you don't see yours.
Book your garage floor estimate in Lancasterand talk with the owner
Call (661) 952-4153 or send the form with your garage's size, and you'll have a written garage floor estimate to compare before you decide. Satisfaction guaranteed on every job.